Functional Description - Omron STC-HD203 Series Product Specifications And User's Manual

6.5 Functional Description

DSP: Shutter/GainTab
AE
AE mode
Normal AE, Long
should be selected.
Convergence luminance
This setting is target luminance at which AE has converged to the appropriate luminance.
AE convergence speed
This setting is used to set the time to be taken for the exposure amount appropriate for the image to be
established.
Convergence end dead band range
This setting is used to set the range in which convergence is to be identified. As for the detail, please refer to the
another chapter
Frame count for outside the dead band
When the absolute value of the error amount is below the setting and the same status has continued for frame
number.
AE tracking start dead band range
This function is used to ensure that the AE operation will not overly respond to changes in the subject when an
object has passed cut across the shooting screen while AE is in the appropriate status. Tracking is started when
the AE error amount is above the setting and this has continued for at least the number of outside thee dead
band frame number. As for the detail, please refer to the
STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS
Product Specifications and Users Guide
AE, USER Mode can be selectable. If User likes to use Fixed Gain, Fixed Shutter, USER mode
another chapter.
No. 13S054-10
19/78