Omron STC-HD203 Series Product Specifications And User's Manual page 5

The camera housing is not connecting to 0 V
line of camera inside circuit.
There is a risk of short circuit between camera
inside ciurcuit and frame ground through other
devices.
This will cause of malfunction.
It is necessary to wiring with turn off the camera.
This will cause of electrification or malfunction.
[Usage instruction]
Do not touch the terminal and PCB board
While turn on the camera.
This will cause of electrification or accident
caused by malfunction.
Do not use without usage that is specified in
the specifications for this camera.
This will cause of personal injury or malfunction.
Do not push contamination into opening of
the camera.
This will cause of electrification or malfunction.
[Maintenance]
Do not disassemble or repair the camera.
This will cause of fire, electrification or
malfunction.
[Disposal]
It is necessary to dispose as industrial waste.
]
STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS
Product Specifications and Users Guide
Caution
It is necessary to wiring and mounting that is
specified in the specifications for this camera.
This will cause of fire or malfunction.
It is necessary to mounting the camera without
stress for the cable.
This will case of electrification or fire.
Warning
Do not put combustibles near the camera.
This will cause of fire.
Do not push metals including screw driver into
radiation holes.
This will cause of electrification or malfunction.
Caution
Do not block the radiation holes.
This will cause of fire due to increase the
camera inside temperature.
Caution
It is turn off the camera when maintaining or
inspecting the camera.
This will cause of electrification.
Caution
No. 13S054-10
5/78