Silicon Laboratories ToolStick-CapTouchSenseDC User Manual page 10

ToolSt ick-CapTouchSenseDC
pressing the S2 switch. The blue and green LEDs will blink a few times and switch off. This indicates
configuration is complete.
9. Press each of the capacitive touch sense switches to test the configuration, and finally press the S2 switch to
return to the game. All four LEDs will light up to indicate that the calibration is complete and the game is ready
to be played.
8. Additional Demo Examples
In addition to the CapTouchSenseDC_SwitchSensitivity example firmware, the ToolStick download package also
includes another example project named CapTouchSenseDC_Memory_Game. The instructions for running this
example can be found at the top of the source file.
The project and source
C:\SiLabs\MCU\ToolStick\CapTouchSenseDC\Firmware\ folder.
10
files for these examples
Rev. 0.3
can be found by default in the