Advertisement
Available languages
Available languages
INSTRUCTION SHEET
PRODUCT: 64678 Current • Page 3 of 3
8. When the rack is not in use the main ratchet arm can be folded down
and the complete rack can be folded up against the vehicle. Ensure
that the cam lever is completely engaged before driving.
9. The rack can be tilted away from the vehicle by pulling the cam lever
and lowering the rack and bikes. NOTE: Ensure you return the rack
to the level position before driving. Move the rack up and down to
ensure the cam lever is fully engaged.
Important Notes:
•
T his bicycle rack has been designed to carry 1 or 2 bikes, 60 lbs. per
bike. Do not install on a Class 1, 1-1/4" hitch.
•
T his rack is designed for typical use and applications (on paved or
smooth gravel roads). Do not use this rack on a vehicle that will be
driven on rough roads or where the rack (and bikes) will be subject
to significant or constant jarring and/or shock, or any vehicle with
very stiff springs that will transfer the load shock directly to the rack
and bikes.
•
P roper fitting and installation of this carrier to your specific vehicle is
critical, and is not the manufacturer's responsibility.
•
I mproper use of this product may result in damage to your rack, your
vehicle, your bicycles, or even other vehicles driving behind you (as a
result of colliding with or trying to avoid fallen bicycles and/or the rack).
•
T he purchaser should be aware that the load created by a rack and
bicycles can exceed the maximum rating on the hitch or bumper.
•
S wagman Racks are powder coated to help prevent rust. When leaving
them outside for extended periods of time the finish will lose its luster.
It is recommended that when not in use it is stored indoors.
•
T ake care to add padding on any area of the bikes that touches another
bike or any part of the vehicle. Damage can and will happen (to your
bikes and/or to the vehicle) if care is not taken during the loading and
transporting of your bikes, and padding used where necessary.
•
B icycle tires should be kept at least 6" away from the exhaust pipes of
the vehicle. The high temperature exhaust exiting from the exhaust
pipes is hot enough to melt or damage tires. The bike rack should also
be kept away from the direct exhaust flow. Also check when the bike
rack is folded up.
•
B ikes fitted with large accessories (such as a child carrying seat) will
greatly increase the wind resistance and therefore the pressure on
the rack and all vehicle mounting points. Reducing vehicle speed will
reduce the chance of any problems occurring because of this situation.
•
A fter reading this manual, should you have any additional questions
regarding the compatibility, fitting, and/or use of this rack, please
call your nearest Swagman authorized retail dealer or Swagman
Customer Service.
Mounting the bike rack on a Trailer or 5th Wheel:
Purchaser is advised that the load created by rack and bicycles will exceed
the strength of trailer or 5th wheel bumper, mounting location or the bike
rack. The rack is not under warranty if mounted in this location.
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm • www.P65Warnings.ca.gov
300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
6
7
Connection Point
8
1/2" Threaded Pin
REV 14/11/19
Advertisement
