Advertisement
5. Pull the hook downward so that the hook is tight against
the tire. After the hook contacts the tire push down hard
until you hear an extra click in the ratchet release. NOTE:
The hooks should be tight against the fork crown and
the tire. Move the bike back and forth to ensure it is fully
seating. Readjust if necessary.
6. Move the rear wheel holder so it is positioned in the
center of the tire (diagram 6).
7. Push the strap through the buckle and pull the strap
tight.
8. Repeat 6 and 7 on the front wheel holder.
NOTE: n smaller wheels you will need to use the space
block.
LOCKING BIKES
1. To lock your bikes rotate the key in the ratchet hook so
the button cannot be depressed (diagram 7).
NOTE: Never leave your bikes unattended for any length
of time. ocks are meant as a deterrent and won't prevent
bike theft.
2.
hen the rack is not in use the ratchet arm can be folded
down and secured with the rear wheel holder strap.
IMPORTANT NOTES:
• Bicycle fork must have safety tabs.
• Remember that you are carrying a bike on your roof and
your car's handling characteristics will differ, so
G S
ER than normal, especially in high winds and
around bends. Keep your speed below 60mph.
• Do not forget that your vehicle will be much higher than
normal, so be care that you have enough room when
entering tunnels, car parks and especially your garage
• Never exceed the vehicle manufacturers or after market
crossbars recommended maximum weight limits.
• Do not transport bicycles with baby carriers, panniers,
disk wheels/wheel cover or bike covers as it can increase
the load on the crossbars and bike rack.
PRODUCT: 64705 Race Ready
5
Installation Instructions
REAR TIRE
3
4
6
7
Advertisement
