FP PostBase Connectivity Manualline page 7

3) Specify whether your proxy requires Authentication
If your proxy server needs authentication, then you
must set P -A =E
ROXY UTH
details on the next wizard pages.
Looks awful. Use Off/On instead of enabled/disabled!
3a) Enter the User Name
3b) Enter the Password
This completes the entry of the proxy server details - touching 'C
part of the wizard.
DRAFT v0.3 English, 01 Mar 2012
here and enter the
NABLED
What's Proxy Authentication?
Often a proxy server needs to know who is
talking to it - to confirm that it is a known
user of the organization's network who is
authorized to have access to the Internet. Any
device will then have to log-on to the proxy
server with its own user name and password.
This process is called 'authentication'.
If in doubt, contact your network administrator. If the
proxy needs authentication they may need to give you
a special user name and password for the device.
An alpha-numeric keyboard will appear on the display
in which you can enter the user name. This keyboard
functions in a comparable way to similar keyboards on
mobile phones - touching the button a number of
times rapidly will cycle through the possible values.
Touching another button, or waiting for a second or
so, will cause the selected value to be entered.
You can enter the password in a similar way. It
operates slightly differently in that, once the character
has been selected, it is then displayed only as "*".
ONTINUE
- 7 -
' will take you to the next