FP PostBase Connectivity Manualline page 5

4.2 Specifying a proxy server
Next, you will be asked about a 'Proxy Server'. If your
organization uses one, you will have to enter its details
so that the meter can get access to the Internet.
4.3 Final steps
Verbindungseinstellungen
Verbindungsart
DHCP
DNS-Server
Proxy
MAC-Adresse
Speichern
Graphics missing
IP-Einstellungen werden automatisch bezogen.
Dieser Vorgang kann einige Minuten dauern.
18
If all goes well, PostBase will now continue with the remainder of its configuration...
DRAFT v0.3 English, 01 Mar 2012
If you have entered '
ENABLED
"Entering Proxy Server Settings".
Ethernet
aktiviert
Automatisch
deaktiviert
00-90-4B-12-93-CE
Zurück
What's a Proxy Server?
Proxy servers are used in most larger
organizations as a bridge between their
internal networks and the Internet. It can
protect the computers in the internal
network against attack from the wider
Internet.
If you are in a small office, it may be that you have a
direct connection to the Internet through your router.
In this case you should answer '
Otherwise, answer '
ENABLED
', then next follow the instructions in section 5,
Finally you will be shown a confirmation of all the
entries you have made.
Check you have entered the details correctly.
After you touch 'C
ONTINUE
connection.
If it can't connect, the wizard will return to its starting
point. In this case, you should first check the
connections, then the settings you have entered. You
can also look at the guide in section 7, or check the
settings with your system administrator.
- 5 -
' here.
DISABLED
'.
' the meter will test the