Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
Warning Temperature (Disabled)
Enables you to set the warning temperature the system can reach before powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
•
CPU Tcontrol
•
System Temperature
•
CPU FAN Speed
•
CPU Vcore
•
VDIMM
•
NB FAN Speed
•
NB Vcore
•
+5V
•
+12V
•
+3.3V
•
+1.2V
•
VBAT
Press <Esc> to return to Frequency/Voltage Control page.
3-18
3.3-8 Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Frequency/Voltage Control
Parameters
Setting
NPT Fid control
[Auto]
NPT Vid control
[Auto]
DIMM Voltage Control
[1.80 V]
Adjust Extra NB Vcore
[1.200V]
Adjust Extra NB<-->CPU HT Vcor[1.200V]
Adjust Extra SB Vcore
[Normal]
: Move
Enter: Select
+/-/PU/PD:Value
F5:Previous Values
F6:Performance Defaults
NPT Fid Control (Auto)
This item allows users to adjust the CPU frequency; the range will be varied
according to different CPUs. We strongly recommend you leave this item at its
default value.
NPT Vid Control (Auto)
This item allows users to adjust the CPU voltage. We strongly recommend you
leave this item at its default value.
Value
Item Help
Menu Level
1.26V
F10:Save ESC:Exit
F1: General Help
F7:Optimized Defaults