Frequency/Voltage Control - ECS P6VPA2T Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus
for your system. The clock speed and system bus are deter-
mined by the kind of processor you have installed in your
system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Clock
CPU Ratio
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal
of free DIMM and PCI slots.
Spread Spectrum (Enabled
If you enable spread spectrum, it can significantly reduce the
EMI (Electro-Magnetic Interference) generated by the system.
CPU Clock (100)
Use the CPU Host Clock to set the frontside bus frequency for
the installed processor (usually 133 MHz, 100 MHz or 66
MHz).
Frequency/Voltage Control
[Enabled ]
[Enabled]
[100]
[Safe Ratio]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
62
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults