Table of Contents
Advertisement
Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
CPU Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
Over Clock Function
↑ ↓ → ← : Move
Enter: Select
F5:Previous Values
CPU Clock Ratio (10 X)
Use the CPU Host/SDRAM/PCI Clock to set the frontside bus frequency for
the installed processor (usually 133 MHz, 100 MHz or 66 MHz). Then use
CPU Clock Ratio Jumpless to set a multiple. The multiple times the frontside
bus must equal the core speed of the installed processor e.g., 3.5 (multiple) x
100 MHz (frontside bus) = 350 MHz (installed processor clock speed).
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and
PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
Frequency/Voltage Control
[10 X]
[Enabled]
[Enabled]
[Press Enter]
+/-/PU/PD: Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
49
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
