ECS Photon Extreme KN3 SLI2 Manual page 35

Hard Disk Boot Priority (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
1. Ch5 M. : WDC ED800JD-00LSA0
2. Bootable Add-in Cards
: Move PU/PD+/-/:Change Priority F10:Save ESC:Exit
F5:Previous Values F6:Fail-Safe Defaults
Bootable Add-in Card
This screen enables users to set the sequence of the bootable devices in system.
Press <Esc> to return to the Advanced BIOS Feature page.
3-6
CPU Internal Cache (Enabled)
All processors that can be installed in this mainboard use internal level 1 (L1) and
external level 2 (L2) cache memory to improve performance. Leave this item at the
default value for better performance.
External Cache (Enabled)
Item Help
Most processors that can be installed in this system use external level 2 (L2) cache
Menu Level
memory to improve performance. Leave this item at the default value for better
performance.
Use < > or < > to
select a device, then press
Quick Power On Self Test (Enabled)
<+> to move it up, or <-> to
Enable this item to shorten the power on testing (POST) and have your system start
move it down the list. Press
<ESC> to exit this menu.
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
First/Second/Third Boot Device (Removable/Hard Disk/CDROM)
Use these three items to select the priority and order of the devices that your system
searches for an operating system at start-up time.The First boot device "CD-ROM"
item is for SATA1~SATA 5 port (Provide by MCP55XE, orange SATA connector) used if
you install SATA CD-ROM in one of SATA1~SATA 5 port. If you installed SATA CD-ROM
F7:Optimized Defaults
in SATA7/SATA 8 or PATA CD-ROM in IDE2 port that provide from J-Micron JMB363
(Red SATA connector is SATA7/SATA8), please choose "CD-ROM name" from first
boot device list in Advance BIOS Features -> First boot
For example, If you installed one AXX DVD-RW in SATA7/SATA8 port, please choose
AXX DVD-RW from first boot device list to boot from AXX DVD-RW. If you insert AXX
DVD-RW in SATA1 port, please choose "CD-ROM" item from first boot device list to
boot from AXX DVD-RW.
device.