Table of Contents
Advertisement
2.
Use the space bar to select the HDD that you want to set as source
drive.
A selected HDD shows a sign before it.
3.
Using the <TAB>, move to the RAID Disk Drive List menu and
highlight the RAID set that you want to rebuild. Press <Del> to
begin rebuilding the Mirror configuration.
A status bar at the bottom of the screen shows the progress of the
rebuilding.
6.2-7 Rebuilding a Mirror Drive
When one of the disks in a RAID 1 (Mirror) configuration is unplugged from
the system, then plugged in again, a dialogue box appears to ask you to rebuild
the Mirror drive. Press<Y>toconfirm;otherwise, press<N>. Press <Y> to
confirm; otherwise, press <N>.
This option allows you to rebuild the Mirror drive later and synchronize the
data between two hard disks.
To rebuild a Mirror drive:
1.
In the main JMB363 RAID BIOS menu, highlight Rebuild Mirror
Drive using the up/down arrow key then press <Enter>.
6-11
Advertisement
Table of Contents
