Table of Contents
Advertisement
NORMA 6003/NORMA 6003+/
NORMA 6004/NORMA 6004+
User Manual
To Change the Battery:
1. Turn off the Product, unplug the power adapter/charger from the power jack, and disconnect all
test leads.
2. Place the Product's operating panel face down on a flat table and lift the stand or remove it from
the Product.
3. Use a slotted screwdriver to rotate the 2 snap bolts on the battery compartment cover by 180° so
that the arrow on the cover points toward the unlock mark and then remove the battery
compartment cover.
4. Use the drawstring on one end of the battery to lift one side of the battery and then remove the
battery completely.
5. Install new batteries and reinstall and fix the battery compartment cover and stand in the reverse
order of the above.
74
Figure 23.
Change the Battery
Advertisement
Table of Contents
