Table of Contents
Advertisement
Result
7.2.7
7.2.8
Precondition
42
7
Initial Start-up
7.2
Configuring the controller
14. Press «DOWN» once.
The
[Login] line is displayed as the active line.
8 9 p s i
0 8 : 1 5
7 User
Name : E00019895
Password: ****************
[Login]
------------------------------
Current access level: 2
15. Press «Enter» to accept the settings.
Access level 2 is displayed.
You are now logged on to SIGMA CONTROL 2 with access level 2, having manually input your
user name and the generated password.
Generating a password for KAESER CONNECT
You also need a password to access KAESER CONNECT for the SIGMA CONTROL 2.
This password is also generated at the SIGMA CONTROL 2.
Entering the password is necessary to
■
Log on to KAESER CONNECT
■
Activate the write mode in the User accounts menu
➤ Proceed as described for "Generating a password for the SIGMA CONTROL 2", see chap‐
ter 7.2.5.
Checking/setting the time and date
Access level 2 is activated.
The display shows the operating mode.
Checking/setting the time
➤ When operating the machine with a timer program, check the time settings at least once
a year.
1. Press «Enter».
The main menu is displayed.
< Configuration ➙ General > menu.
2. Select the
Service manual
Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
1 7 6 ° F
Menu
Active line
Display access level 0
9_9450 03USE
Advertisement
Table of Contents
