Omron NXR Series User Manual page 63

Tightening locations Screw size Tightening torque range
Hub mounting holes
Precautions for Correct Use
• Install the Hub properly. The Hub may be affected by vibration if it is not installed properly,
which may cause failure.
• Do not allow oil to adhere to the screws. Oil adhesion may damage the screws.
• Tighten the screws with an appropriate screwdriver. Tightening a screw with an inappropriate
screwdriver may damage the screw.
NXR-series IO-Link I/O Hub User's Manual (W620)
M5 1.47 to 1.96 N·m
5 Installation and Wiring
5
5-3