Omron NXR Series User Manual page 32

1 Features and System Configuration
Let-
Item
ter
(C) NXR-series IO-
Link Master Unit
for EtherNet/IP
(D) NXR-series IO-
Link I/O Hub
(E) Non-IO-Link con-
nected external
device
(F) IO-Link cable
(G) I/O cable
(H) CX-Configura-
*1
torFDT
(I) IODD files
*1. Refer to A-1 Version Information on page A-2 for the available versions.
1-6
An EtherNet/IP adapter that provides IO-Link master functions with an environmen-
tal resistance of IP67. The Unit performs the following:
•
Exchanging data with the EtherNet/IP scanner through the EtherNet/IP network
•
Exchanging data with the NXR-series IO-Link I/O Hub through IO-Link communi-
cations
The NXR-series IO-Link I/O Hubs can connect to the IO-Link Master Units shown
in version information. Refer to A-1 Version Information on page A-2 for the mod-
els of the IO-Link Master Units to which the Hubs can connect.
An IO-Link device. The Hub exchanges I/O data from the external devices connect-
ed to it with the IO-Link Master Unit through IO-Link communications.
A sensor, actuator, or other device that handles ON/OFF signals.
A cable that connects an IO-Link Master Unit to an IO-Link I/O Hub.
The cable is called an IO-Link cable in the user's manual for an IO-Link I/O Hub,
and called an I/O cable in the user's manual for the OMRON IO-Link Master Unit.
A cable that connects an IO-Link I/O Hub to a non-IO-Link connected external de-
vice.
A Support Software to configure and monitor IO-Link I/O Hubs. The software is in-
cluded in the CX-One FA Integrated Tool Package and the Sysmac Studio Automa-
tion Software.
These files contain IO-Link device definitions. The IODD files for OMRON's IO-Link
devices are automatically installed when you install CX-ConfiguratorFDT. OMRON
IO-Link device files are available for download from the OMRON website.
Description
NXR-series IO-Link I/O Hub User's Manual (W620)