Test Mode - Sony HCD-SLK20D Service Manual

HCD-SLK10D/SLK20D
COLD RESET
Reset the system to its factory default settings.
Procedure:
?/1
1. Press the [ ] button to turn on the system.
M m <
2. Touch the [ ], [ ], [ ] and [
tings", and touch the [ENTER] sensor.
M m <
3. Touch the [ ], [ ], [ ] and [
all settings", and touch the [ENTER] sensor.
< ,
4. Touch the [ ] and [ ] sensors to select the "Yes", and touch
the [ENTER] sensor.
5. All the settings are reset and returned to the default settings,
then become standby mode.
VERSION DISPLAY
Each version, destination and model name are displayed.
Procedure:
?/1
1. Press the [ ] button to turn on the system.
2. Press the [VOL –] button and touch two sensors of [
[RETURN] simultaneously.
3. The system version, GUI version, DVD version, destination
and model name are displayed on the liquid crystal display
module.
• Screen display
Settings
System Information
Software version
System :
GUI :
DVD :
Dest. :
Model :
1 System version
2 GUI version
3 DVD version
4 Destination:
04: 120V AC area in E, Chilean or Peruvian model
05: Singapore or Thai model
08: Chinese model
10: Saudi Arabia model
11: Indian model
12: Brazilian model
16: Mexican model
5 Model name:
00: HCD-SLK10D
16: HCD-SLK20D
Releasing method:
?/1
Press the [ ] button to turn off the system.
26
SECTION 3

TEST MODE

,
] sensors to select the "Set-
,
] sensors to select the "Reset
x
] and
1
2
3
4
5
COMMON TEST
The test of each category is executed.
Procedure:
?/1
1. Press the [ ] button to turn on the system.
2. Press the [VOL –] button and touch two sensors of [
[ENTER] sensor simultaneously, then become common test
mode.
3. When the [VOL +] button is pressed, the sound volume in-
creases to its maximum and the message "Max." appears on
the liquid crystal display module.
4. When the [VOL –] button is pressed, the sound volume de-
creases to its minimum and the message "Min." appears on the
liquid crystal display module.
Releasing method:
?/1
Press the [ ] button to turn off the system.
DVD SHIP MODE AND COLD RESET
Cold reset is executed at the same time with DVD ship
mode.
Procedure:
?/1
1. Press the [ ] button to turn on the system.
2. Touch the [HOME] sensor.
M m <
3. Touch the [ ], [ ], [ ] and [
DVD", and touch the [ENTER] sensor.
4. Confi rm there is no disc in the disc slot.
x
5. Touch two sensors of [ ] and [RETURN] and press the [
button simultaneously.
6. Become standby mode, then become DVD ship mode.
Releasing method:
Pull out the power code.
VIDEO/SAT CHANGE
This mode changes external video source.
Procedure:
?/1
1. Press the [ ] button to turn on the system.
M m <
2. Touch the [ ], [ ], [ ] and [
tings", and touch the [ENTER] sensor.
M m <
3. Touch the [ ], [ ], [ ] and [
nal Video Source", and touch the [ENTER] sensor.
M m
4. Touch the [ ] and [ ] sensors to select the "Video" or "Satel-
lite", and touch the [ENTER] sensor.
5. The external video source changed.
DISC ANTITHEFT LOCK
This mode is used to unable to take sample disc out of disc slot in
the shop.
Procedure:
?/1
1. Press the [ ] button to turn on the system.
2. Touch the [HOME] sensor.
M m <
3. Touch the [ ], [ ], [ ] and [
DVD", and touch the [ENTER] sensor.
x
4. Touch the [ ] sensor and press the [
and hold for more than fi ve seconds.
5. The message "LOCKED" is displayed on the liquid crystal
display module and the disc slot is locked (Even if pressing the
Z
[ ] button, the message "LOCKED" is displayed on the liquid
crystal display module and the disc slot is locked).
Releasing method:
x
1. Touch the [ ] sensor and press the [
and hold for more than fi ve seconds.
2. The message "UNLOCKED" is displayed on the liquid crystal
display module and the disc slot is unlocked.
x
] and
,
] sensors to select the "CD/
[/1
,
] sensors to select the "Set-
,
] sensors to select the "Exter-
,
] sensors to select the "CD/
Z
] button simultaneously,
Z
] button simultaneously,
]