Sony HCD-SHAKE10 Service Manual

2019/10/25 23:34:43 (GMT+09:00)
HCDSHAKEX10/HCDSHAKEX30/HCDSHAKEX70
SERVICE MANUAL
Ver. 1.3 2019.10
• HCD-SHAKE10 is the tuner, USB, CD Player, Bluetooth, NFC and amplifi er section in SHAKE-X10.
• HCD-SHAKE30 is the tuner, USB, CD Player, Bluetooth, NFC and amplifi er section in SHAKE-X30.
• HCDSHAKEX10 is the tuner, USB, DVD Player, Bluetooth, NFC and amplifi er section in SHAKE-X10D.
• HCDSHAKEX30 is the tuner, USB, DVD Player, Bluetooth, NFC and amplifi er section in SHAKE-X30D.
• HCDSHAKEX70 is the tuner, USB, DVD Player, Bluetooth, NFC and amplifi er section in SHAKE-X70D.
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus aff ected unit was found during
service, contact your Service Headquarters.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(US models only)
Shake-X30 only
With 4 ohm loads, both channels driven, from
150 Hz – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Shake-X10 only
With 4 ohm loads, both channels driven, from
150 Hz – 20,000 Hz; rated 80 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Inputs
AUDIO/PARTY CHAIN IN L/R
(SHAKE-X10/X30):
Voltage 2 V, impedance
47 kilohms
AUDIO/PARTY CHAIN IN (TV) L/R
(SHAKE-X10D/X30D/X70D):
Voltage 2 V, impedance
47 kilohms
TV (ARC) (SHAKE-X10D/X30D/X70D):
Supported audio signal:
2-channel Linear PCM
MIC1:
Sensitivity 1 mV, impedance
10 kilohms
9-890-688-04
2019J80-1
©
2019.10
Photo: HCDSHAKEX70
CD/DVD Section
MIC2/GUITAR:
Sensitivity 1 mV, impedance
10 kilohms (When guitar mode is
turned off.)
Sensitivity 200 mV, impedance
1 Megaohm (When guitar mode is
turned on.)
Outputs
AUDIO/PARTY CHAIN OUT L/R:
Voltage 2 V, impedance 1 kilohm
VIDEO OUT (SHAKE-X10D/X30D/X70D):
Max. output level 1 Vp-p,
unbalanced, Sync. negative load
impedance 75 ohms
HDMI OUT (TV) (SHAKE-X10D/X30D/
X70D):
Supported audio signal:
2-channel Linear PCM (up to
48 kHz), Dolby Digital
HDMI section (SHAKE-X10D/X30D/X70D)
Connector:
Type A (19 pin)
Disc player section
System:
Compact disc and digital audio system
(SHAKE-X10/X30)
Compact disc and digital audio and
video system (SHAKE-X10D/X30D/
X70D)
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
HCD-SHAKE10/SHAKE30/
Model Name Using Similar Mechanism
CD/DVD Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 μW
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response:
20 Hz – 20 kHz
Video color system format (SHAKE-X10D/
X30D/X70D):
LA9 model:
NTSC
Other models:
NTSC and PAL
USB section
Supported USB device:
Mass Storage Class
Maximum current:
1 A
(USB) port:
Type A
FM tuner section
FM stereo, FM superheterodyne tuner
Antenna:
FM lead antenna
Tuning range:
87.5 MHz – 108.0 MHz (100 kHz step)
(SHAKE-X10/X30)
87.5 MHz – 108.0 MHz (50 kHz step)
(SHAKE-X10D/X30D/X70D)
US Model
Canadian Model
HCD-SHAKE10/SHAKE30
AEP Model
Thai Model
HCDSHAKEX30/HCDSHAKEX70
UK Model
HCDSHAKEX30
Russian Model
Australian Model
HCDSHAKEX10/HCDSHAKEX30
E Model
HCDSHAKEX10/
HCDSHAKEX30/
HCDSHAKEX70
HCD-SHAKEX1/SHAKEX3/SHAKEX7
CDM90-DVBU204//M
CMS-S76RFS7GP
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m (33 ft)
Frequency band:
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method:
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
SPP (Serial Port Profile)
Supported codecs:
SBC (Subband Codec)
AAC (Advanced Audio Coding)
LDAC
*1 The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna's performance, operating system,
software application, etc.
*2 BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
– Continued on next page –
CD/DVD RECEIVER
*1
*2 :
SYS SET