Display Board - Sony HCD-SLK20D Service Manual

HCD-SLK10D/SLK20D

2-13. DISPLAY BOARD

Note 1: When you install the wire (flat type), please
install them correctly.
There is a possibility that this machine damages
when not correctly installing it.
OK
Insert is straight
to the interior.
connector
wire
(flat type)
‡ :ire VettiQJ
DISPLAY board
tape
– DISPLAY board block iQQer view –
18
NG
Insert is incline.
connector
wire
(flat type)
7 connector
5 wire (flat type) (5 core)
(CN605)
4 wire (flat type) (7 core)
(CN604)
3 cushion (WH)
9 DISPLAY board
– DISPLAY board block rear bottom view –
tape
holder (PWB DISPLAY)
(CN602)
Note 2: Do not insert the wire (flat type) in the same amount of
connector by mistake. Refer to "2-21. HOW TO BEND
WIRE (FLAT TYPE)" (page 24) and "5-1. FLAME
PRINTED WIRING BOARDS" (page 31) for details.
2 holder (PWB DISPLAY)
6 connector
(CN405)
8 ground plate (USB)
1 three screws
(BVTP2.6)