5.8.2 Flow meter ground water
The flow rate meter is part of the heat pump and
must be installed by the system installer according
to the OCHSNER installation guidelines. Please ob-
serve the instructions in the installation manual
for flow rate measuring meters.
If the flow rate meter is either not installed, or in-
correctly installed, OCHSNER will not undertake
the commissioning of the system
Fig. 12: Installation of flow rate sensor heat source ground waterand heating system
BA OCHSNER AQUA TERRA_EN_V01.1.docx
.
Fig. 13: Wall ducting
OCHSNER accepts no liability for possi-
ble damage which may occur if the flow
rate meter is either not installed, incor-
rectly installed, sized or wired up.
Page 17 of 72