Functional Description; Specifications; Manifold Connections - Carlisle DeVILBISS AGMDPRO-102-HV30C-K Service Manual

FUNCTIONAL DESCRIPTION

These Sprayguns are suitable for use with both water-based and solvent-based coating materials.
They are not designed for use with highly corrosive and/or abrasive materials and if used with such
materials it must be expected that the need for cleaning and/or replacement of parts will be increased.
If there is any doubt regarding the suitability of a specific material, contact your DeVilbiss Distributor
or Carlisle Fluid Technologies direct.
NOTE:
This gun is not to be used with halogenated hydrocarbon solvents or cleaning agents such as 1,1,1,-
Trichloroethane or methylene chloride. These solvents can react with the aluminium components used
in this gun. The reaction can become violent and lead to an equipment explosion.

SPECIFICATIONS

FLUID AND AIR INLET PRESSURES
P1 = Max Air Input Pressure
P2 = Max Fluid Input/Recirculation Pressure
P3 = Cylinder Air Pressure
ENVIRONMENTAL
Max Ambient Operating Temperature
MATERIALS OF CONSTRUCTION
Gun Head and Fluid Passageways
Gun Body Material
Air Cap Material
Fluid Tip and Needle Construction
Seals and O-Rings

MANIFOLD CONNECTIONS

P1 = Air Inlet Size
P2 = Fluid Inlet Size
P3 = Cylinder Inlet
WEIGHT
Gun only
Gun + Intermediate Plate
Gun + Intermediate Plate + Machine Adaptor
DIMENSIONS - Gun only
L x H x W mm
SB-E-2-990 R6.0
12 bar [174 psi]
15 bar [217 psi]
3.5 - 6 bar [51 - 87 psi]
40°C Nominal [104°F]
Stainless Steel 303
Anodised Aluminium
Electroless Nickel Plated Brass
Stainless Steel 303
Acetal Needle Tip
Viton Extreme
Polyethylene
2/24
EN
1/8" BSP
1/8" BSP
1/8" BSP
646g
715g
960g
120 x 46 x 46
www.carlisleft.com