EMS eNfusion 1252-A-4100-01 System Description, Installation And Maintenance Manual page 82

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
Installation Planning Steps
Fwd ID
System mode
Data I/O
(if applicable)
SDI
3. Wiring
Antenna
Power
ISDN:
Wire the ISDN line. Channels 1 and 2 operate over ISDN 1.
Ethernet:
Wire the Ethernet port for SBB.
Inertial Navigation System (INS)
Analog Tip/Ring (POTS)
CEPT-E1,
Future PBX applications (optional)
4. Configuration
Program the Land Earth Station (LES) Access Codes
Configure the CNX Cabin Gateway if required
23-15-30
Multi-Control
BITE A/B
HPA Mute A/B
ISDN-1
Ethernet-1
C-2
8 MAY 09