Electrical Installation; Cabling Notes; Figure 3-1 Hsd-Xi System Transmit (Tx) Loss - EMS eNfusion 1252-A-4100-01 System Description, Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
You need the following hardware to install the HSD-Xi terminal:
• size 1 ARINC 600 connector
• size 1 coax contacts (on HSD-440 tray)—installation specific
• size 5 coax contacts—installation specific
4.

Electrical Installation

A. Cabling Notes
The system transmit loss between the network mode HSD terminal and the HSD-Xi
terminal should be as close as possible to 29.5 dB. Figure 3-1 illustrates the System
Transmit (TX) loss.

Figure 3-1 HSD-Xi System Transmit (TX) Loss

23-15-30
3-2
8 MAY 09