Connecting To The Hsd-Xi Terminal Through The Network Mode Hsd Console Mode; Loading Software To The Hsd-Xi Terminal - EMS eNfusion 1252-A-4100-01 System Description, Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
B. Connecting to the HSD-Xi terminal through the network mode HSD Console Mode
Use the procedures in this section to verify the operation of the HSD-Xi terminal. These
procedures use the console mode of the network mode HSD terminal maintenance port
utility.
NOTE: For information about how to connect to the network mode HSD terminal
maintenance port utility, see the eNfusion™ HSD-440 High-speed Data Terminal
System Description, Installation, and Maintenance Manual, MN-1252-33077.
To activate the console mode of the network mode HSD maintenance port utility:
1. Connect to the maintenance port utility of the network mode HSD terminal.
2. To navigate to Menu 18, press CTRL + N.
3. To activate the HSD-Xi console mode, press x.
A prompt appears for the number of the associated HSD-Xi terminal. The network
mode HSD supports only one HSD-Xi terminal.
4. To select the HSD-Xi terminal, press 1, and then press ENTER.
The maintenance port utility connects to the HSD-Xi terminal.
5. To access the HSD-Xiterminal, type the password maint.
Menu 1 of the HSD-Xi maintenance port utility appears. You are connected to the
HSD-Xi terminal.
C. Loading Software to the HSD-Xi Terminal
You can perform a software upload on the HSD-Xi terminal using the HSD-Xi maintenance
port, or ARINC connector.
To upload HSD-Xi terminal channel card software:
1. Connect a computer to the maintenance port of the HSD-Xi terminal.
2. Save the HSD Load Program file (PN 1110-SW-1021) to a folder on your computer.
NOTE: EMS SATCOM recommends that you create a folder named HSD_Load
in the root directory of the computer and save the load application file
to this folder.
3. Apply power to the HSD-Xi terminal.
4. Close all other applications running on the computer.
The load program may not execute successfully if other programs are running.
5. To launch the load application, in the HSD_Load folder, double-click on
ADT_LOAD.exe.
The ADT_LOAD application opens in a DOS window and displays the Load Target
menu.
6. To load channel card application software (for example: appl41.hex, cfig41.hex) to
channel card #1, from the Which Target menu type 22, and then press ENTER.
The load application prompts you to type in a filename.
23-15-30
5-2
8 MAY 09