Trace:feed - ITech IT8700 Series Programming Manual

Command Syntax
TRACe:POINts <NRf+>
Parameters
2 to 1000 | MINimum | MAXimum | DEFault
*RST Value
1000
Examples
TRAC:POIN 10
Query Syntax
TRACe:POINts? [ MINimum | MAXimum | DEFault ]
Returned Parameters
<NR1>
Related Commands
TRAC:FEED

TRACe:FEED

This command is used to select the source of readings to be placed in the
buffer. With VOLTage selected, voltage readings are placed in the buffer,
TRAC:POIN maximum values is 2000. With CURRent selected, current
readings are placed in the buffer, TRAC:POIN maximum values is 2000. With
TWO selected, voltage and current are placed in the buffer when storage is
performed, TRAC:POIN maximum values is 1000.
Command Syntax
TRACe:FEED <CRD>
Parameters
VOLTage | CURRent | TWO
*RST Value
TWO
Examples
TRAC:FEED VOLT
Copyright © Itech Electronic Co., Ltd.
TRACe Subsystem
61