Status:questionable - ITech IT8700 Series Programming Manual

Event register bits. This command is not channel specific, it applies to the entire
mainframe.
Command Syntax
STATus:OPERation:ENABle <NR1>
Parameters
0 to 65535
Default Value
0
Examples
STAT:OPER:ENAB 32 STAT:OPER:ENAB 1
Query Syntax
STATus:OPERation:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:OPER?

STATus:QUEStionable?

This query returns the value of the Questionable Event register. The Event
register is a read-only register that holds (latches) all events that pass into it.
Reading the Questionable Event register clears it. This command is not
channel specific, it applies to the entire mainframe.
Query Syntax
STATus:QUEStionable[:EVENt]?
Parameters
None
Examples
STAT:QUES:EVEN?
Returned Parameters
<NR1> (register value)
Copyright © Itech Electronic Co., Ltd.
STATus Subsystem
43