Status:channel:enable; Status:csum - ITech IT8700 Series Programming Manual

Examples
STAT:CHAN:COND?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:CHAN?

STATus:CHANnel:ENABle

Channel Specific
This command sets or reads the value of the Channel Enable register for a
specific channel. The particular channel must first be selected by the CHAN
command.
Command Syntax
STATus:CHANnel:ENABle <NR1>
Parameters
0 to 65535
Examples
STAT:CHAN:ENAB 3
Query Syntax
STATus:CHANnel:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS

STATus:CSUM?

This query returns the value of the Channel Event summary register. The bits in
this register correspond to a summary of the channel register for each input
channel. Reading the Channel Event summary register clears it. This command
is not channel specific, it applies to the entire mainframe.
Copyright © Itech Electronic Co., Ltd.
STATus Subsystem
40