Sony DMW-C1 Installation Manual page 24

h MASTER fader
Uniformly adjusts the audio level of all tracks.
Rear panel
1 HEADPHONES connector
HEADPHONES
a HEADPHONES connector (stereo phone jack)
Connect headphones to monitor the audio signals input to
the MONITOR IN connector (when used in the XPRI NS
system).
b DC IN connector
Connect to the DC OUT connector of the supplied
AC adaptor.
c USB PORT 1 to PORT 3 connectors
You can connect these connectors to various control panels
using USB cables.
d UPSTREAM PORT connector (USB)
Using a USB cable, connect to the XPRI/XPRI NS main
unit, or to the Jog & Shuttle Control Panel or the Editing
Control Panel connected to the XPRI main unit.
e MONITOR OUT connector (stereo minijack)
Outputs the signal input to the MONITOR IN connector in
a loop-through manner (when used in the XPRI NS
system). You can connect optional active speakers to this
connector. Audio signals are output to the MONITOR
OUT connector even when headphones are connected to
the HEADPHONES connector.
24
Names and Functions of Parts
UPSTREAM PORT USB
PORT 1
MONITOR IN MONITOR OUT
4 UPSTREAM PORT connector
5 MONITOR OUT connector
6 MONITOR IN connectors
i Channel faders 1 to 8
Individually adjust the audio levels of the audio input
source channel or timeline track.
PORT 2 PORT 3
3 USB PORT 1 to PORT 3 connectors
f MONITOR IN connectors (RCA phono jack, 2)
Connect to the MON OUT L/R connectors of the AV I/O
Block in the XPRI system.
DC IN
2 DC IN connector