FutureLogic PSA-66-ST Instructions Manual page 9

Toolbar
Buttons
b. Select the communications port to which the printer is connected in the Select Comm
Ports for Auto Mode area.
c. Click the Apply button.
d. Click the Select Firmware button to set up the firmware.
Note: The firmware file (.VFX) must be located in the same folder as the Download Utility.
e. Select the firmware file and click the Open button.
The Auto Download Preferences dialog updates to display the version number of the
selected firmware file.
Click the Save Preferences toolbar button to save these preferences and use them each
f.
time you access the Download Utility.
Note: If you move your Download Utility files to another computer, double-check your
preferences settings on the new computer as they may no longer apply.
g. Click the Back to Prior toolbar button to return to the main window of the Download
Utility.
The main window refreshes to display the download file name, firmware version, and
(optionally) the ticket template(s).
Tip: To view the selections for the printer, click the View Selections button.
Copyright © 2004 FutureLogic, Inc. All Rights Reserved.
Figure 2-8 Auto Download Preferences Dialog
PSA-66-ST
Firmware Download Utility Instructions
Select Comm
Ports For Auto
Mode Area
PUBN Page 6 of 22 11/30/2004
PUBN-000015 REV.A