FutureLogic PSA-66-ST Instructions Manual page 19

7. After the PSA-66 4-Station Stand powers up, the image(s) on the screen will change to
indicate that the printers are detected.
If the printers are detected, click the Start Download button.
Figure 3-12
The process will continue automatically through completion.
The State area of the main window updates to display the status of the download in
progress.
State Area
Progress
Indicator
Caution: Do NOT power down the PSA-66 4-Station Stand or disconnect the cable from
the PC during this process! Doing so MAY result in unusable printers that are flushed and
will not communicate!
After the printer(s) downloading is complete, the printer(s) prints a ticket showing the
firmware version and ticket package. Compare the firmware version with the version
displayed on the screen. If the version numbers match, the download was successful.
8. Click the Abort Download button.
9. (Optional) Click anywhere in the State area of the main window to view the status of the
printer download.
The Printer Status Dialog displays.
Copyright © 2004 FutureLogic, Inc. All Rights Reserved.
Download Utility – Control Download for This Port Commands
Figure 3-13 Download Utility – Main Window
PSA-66-ST
Firmware Download Utility Instructions
PUBN Page 16 of 22 11/30/2004
PUBN-000015 REV.A