FutureLogic PSA-66-ST Instructions Manual page 10

8. After the printer powers up, the image(s) on the screen will change to indicate that the
printer was detected.
If the printer is detected, click the Start Download button.
Figure 2-9
The process will continue automatically through completion.
The State area of the main window updates to display the status of the download in
progress.
State Area
Progress
Indicator
Caution: Do NOT power down the printer or disconnect the RS232 cable from the PC
during this process! Doing so MAY result in an unusable printer that is flushed and will not
communicate!
After the printer downloading is complete, the printer prints a ticket showing the firmware
version and ticket package. Compare the firmware version with the version displayed on the
screen. If the version numbers match, the download was successful.
9. Click the Abort Download button.
10. (Optional) Click anywhere in the State area of the main window to view the status of the
printer download.
The Printer Status Dialog displays.
Copyright © 2004 FutureLogic, Inc. All Rights Reserved.
Download Utility – Control Download for This Port Commands
Figure 2-10 Download Utility – Main Window
PSA-66-ST
Firmware Download Utility Instructions
PUBN Page 7 of 22 11/30/2004
PUBN-000015 REV.A