FutureLogic PSA-66-ST Instructions Manual page 8

2. Click the Abort Load or Stop Download toolbar button to verify that the download process is
NOT active.
3. Connect the printer to the PC using the FutureLogic, Inc. Evaluation Cable (Part Number
150-00013) or other approved cabling.
Note: If using a Nexplex printer, connect using the power supply.
4. Power up the printer.
5. Load paper into the printer.
The paper will self feed and stop with the second ticket in place.
6. Tear off the extended ticket.
7. (Optional) Set up your preferences if using the Download Utility for the first time.
a. Click the Preferences toolbar button.
The Auto Download Preferences dialog displays.
Copyright © 2004 FutureLogic, Inc. All Rights Reserved.
Figure 2-6 Download Utility Toolbar
Figure 2-7 Load Paper into Slot
PSA-66-ST
Firmware Download Utility Instructions
Paper
Loading
Slot
PUBN Page 5 of 22 11/30/2004
PUBN-000015 REV.A