Version Control And Verification - FutureLogic PSA-66-ST Instructions Manual

The self test ticket contains information similar to the following:
Note: The download process will not complete if any of these steps are not successful.
The result of a failed download process will be a printer with its memory flushed or
otherwise unable to boot successfully. Specifically, the printer will not be capable of
printing. If this occurs, repeat these steps. If not successful, follow your RMA procedure.
12. Remove each printer from the PSA-66 4-Station Stand.
13. Return each printer to the appropriate machine.
3.3.1

Version Control and Verification

The firmware version number will be printed on the ticket after the download is complete.
Verify that this matches the firmware version displayed on the screen.
Copyright © 2004 FutureLogic, Inc. All Rights Reserved.
Model:
Firmware:
COMMUNICATION
Interface:
Baud Rate
Data Bits:
Parity:
Handshaking:
PRINT CONTROL:
Darkness Control: +00%
Black Bar Index: Enabled
Print On Demand: Disabled
Auto Sleep Timer:
SYSTEM RESOURCES
Templates:
Print Regions:
Graphics:
Fonts:
Figure 3-15
PSA-66-ST
Firmware Download Utility Instructions
PSA-66-xxxx
STPV2.1.1 TKT-2.3
Serial
19,200
8
NONE
XON/OFF+HARDWARE
Off
1,2,3,4,5,6,7,8,9,A,B
1,2,3,4,5,6,7,8,h,9,A,B
C,D,E,F,G,I,J,K,L,N,O,P
Q,R,S,T,U,Z,X,a,b,c,d,e,
f,g,i,j,k,l,m,n,o,p,q
3(0), 1(0), 2(0), 4(0)
7(0), 8(0), 5(0)
Sample Self Test Ticket
PUBN Page 18 of 22 11/30/2004
PUBN-000015 REV.A