Toro Workman MDE 07299 Operator's Manual page 17

Light Switch
The light switch is located to the left of the battery-discharge
indicator (Figure 10). Use the light switch to turn the
headlights on and off.
Figure 10
1. Light switch
2. Battery/hour meter
3. Machine-status light
4. Cargo bed lift switch
(optional)
Battery-Discharge Indicator
The battery/hour meter is located to the left of the steering
column (Figure 10). The battery/hour meter indicates of the
remaining charge in the batteries
of operating hours on the machine. The battery meter is
located at the top of the LCD screen. When the machine
batteries are fully charged, ten indicator bars extend from the
0 to the 1 position. As the charge is used, the indicator bars
disappear starting at the right side of the meter. For detailed
information on the battery meter, refer to
System (page 22).
The hour meter is located at the bottom of the LCD screen.
It logs operating hours whenever the key is in the On position
and the machine is in motion.
5. Rear lift switch (optional)
6. Machine-direction switch
7. Horn button (TC Models
only)
8. On/Off switch
(Figure 16) and the number
Using the Battery
Machine-Status Light
The machine-status light is located to the right of the steering
column (Figure 16). The machine contains a computer that
monitors the state of the machine electrical systems. This
computer communicates the status of the machine to you
through the machine-status light. Always check this light
when you turn the On/Off switch to the On position. When
there are no problems and the machine is operational, the
light is on.
When there is a problem, the light flashes. The light flashes
at various intervals for different problems and events. If the
light blinks, refer to Using the Battery System (page 22)
description of the flash codes.
Cargo Bed Lift Switch (Optional)
When the lift is electric bed lift is installed, the cargo bed
lift switch is located to the right of the machine-status light
(Figure 10). Use this cargo bed lift switch to raise and lower
the cargo bed.
Rear Lift Switch (Optional)
When the rear electric lift is installed, the rear lift switch is
located to the left of the machine direction switch
Use this rear lift switch to raise and lower the rear lift.
Machine-direction Switch
The machine-direction switch is located to the right of the
optional rear lift switch
between forward and reverse operation.
Note: If the machine-directional switch is moved to the
Reverse position when the On/Off switch is in the On
position, a buzzer will sound to warn the operator that the
machine is set to move in the reverse direction.
Horn Button (TC Models only)
The horn button is located at the lower left corner of the dash
panel (Figure 10) Press the horn button to sound the horn .
On/Off Switch
Use the On/Off switch to activate the electrical systems of
the machine. Rotate the key clockwise to the On position
to operate the machine and accessories. After stopping the
machine, rotate the key counterclockwise to the Off position
(Figure 10).
Note: Remove the key when leaving the machine.
17
(Figure 10). Use this switch to toggle
for a
(Figure 10).