CP Plus Cosmic User Manual page 125

2.14.4.2.4 Multi Preview
Click zero-channel encoding button, you can go to the following interface. See. Here you can
enable and set zero-channel encoding function so that you can view several video sources at
one channel. See interface in Figure 2-138.
Enable: This function is disabled by default. Check the box here to enable this function
so that you can control the zero-channel encoding function at the WEB.
Compression: System default setup is H.264. You can set according to device capability.
Resolution: The resolution value may vary due to different device capabilities. Please
select from the dropdown list.
Frame rate: The frame rate value may vary due to different device capabilities. Please
select from the dropdown list.
Bit Rate: The bit rate value may vary due to different device capabilities and frame rate
setups. Please select from the dropdown list.
Save: Click the Save button to save current setup. If this function is disabled, you
cannot operate zero-channel encoding function at the WEB, the video is black or null
even you operate when the function is disabled. After you enabled this function, login the
Web and you can select
zero-channel encoding mode at the right corner of the interface
Select a mode; you can view the local preview video.
Figure 2-137
.
119