Table of Contents
Advertisement
This chapter covers the following topics:
•
Power On-Self-Test
•
Compaq-approved cartridges
•
Operating the SDLT drive
•
Front panel indicators and buttons
•
Write-protecting a cartridge
•
Cartridge handling and storage
Power On Self-Test
When power is initially applied, the SDLT drive performs a Power On Self-Test
(POST). After the user powers up the drive, the green indicator flashes while POST is
performing. When the green indicator is illuminated, the drive is ready for operation.
NOTE: If the amber indicator is illuminated, a problem has been detected. See Chapter 4,
"Troubleshooting the SDLT Drive."
Compaq-approved Cartridges
Table 3–1 lists Compaq-approved cartridges:
Table 3–1: Cartridge Types and Formats
Media Compatibility
StorageWorks SDLT Tape Drive by Compaq Reference Guide
Operating the SDLT Drive
SDLT 110/220
SDLT Tape 1
DLT Tape IV (Read only)
DLT Tape I: TRS13
Model (Read Only)
SDLT 160/320
SDLT Tape 1
DLT Tape IV (Read only)
DLT Tape I (Read Only)
3
3–1
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks SDLT 110 and is the answer not in the manual?
Questions and answers