Table of Contents
Advertisement
(for maintenance)
When maintaining the connected equipment, turn OFF
the unit's "Power" switch to stop the output, and stop the
supply of the "input power supply".
• Even if the input power supply to the UPS is stopped
while it is in operation, the power output of his unit
does not stop and power is supplied from the battery.
Do not disassemble, repair, or modify the unit.
• Doing so may cause an electric shock or a fire.
If fluid leaks from the interior, do not touch the fluid.
• Doing so may cause blindness or burns.
• If the fluid contacts your eyes or skin, wash it out with
lots of clean water and consult your doctor.
Do not throw the unit into fire.
• Since the battery is incorporated in the unit, the
insulator may melt, the gas exhaust valve or protection
mechanism may be damaged, or the electrolyte may
catch fire, and it may result eventually in an abnormal
heating, smoke, rupture or fire.
Do not insert metal objects into the input terminal block
and the output terminal block of the UPS.
• Doing so may result in electric shock.
Do not insert metal objects into the battery connectors.
Do not short between the connector terminals.
• Doing so may result in electric shock.
• The battery's protection board may be damaged due
to a short-circuit.
(for battery replacement)
Risk of explosion if battery is replaced by an incorrect
type.
• Not doing so may cause a fire.
• Battery pack for; product model: S8BA-B120L.
Do not replace the battery in a place where there is
flammable gas.
• Spark may occur when connecting the battery, which
may cause an explosion or fire.
If fluid leaks from the battery, do not touch the fluid.
• Doing so may cause blindness or burns.
• If the fluid contacts your eyes or skin, wash it out with
lots of clean water and consult your doctor.
Do not disassemble or modify the battery.
• A safety mechanism and protection mechanism to
prevent danger are embedded into the battery. If they
are damaged, it may cause an abnormal heating,
smoke, rupture or fire on the battery.
Do not drop the battery and do not expose it to strong
impact.
• Doing so may cause a leakage, abnormal heating,
smoke, rupture or fire on the battery. And, if the
battery's protection mechanism is broken, the battery
may be charged at an abnormal current or voltage, an
abnormal chemical reaction may occur inside the
battery, and it may result eventually in an abnormal
heating, smoke, rupture or fire.
Do not short the battery with metal objects.
• Doing so could cause an electric shock, fire or burn.
• Some electrical energy still remains inside the spent
battery.
Do not dispose of battery in a fire or damage battery.
• The insulator inside the battery may melt, the gas
exhaust valve or protection mechanism may be
damaged, or the electrolyte may catch fire, and it may
result eventually in abnormal heating, smoke, rupture
or fire.
Do not use a new battery and an old battery at the same
time.
• The battery may be excessively discharged while
being used or excessively charged while being
charged, an abnormal chemical reaction may occur
inside the battery, and it may result eventually in an
abnormal heating, smoke, rupture or fire.
• A battery can present a risk of electrical shock and
high short circuit current.
• Contact with any part of a grounded battery can result
in electrical shock.
• The following precautions should be observed when
working on batteries:
(a) Remove watches, rings, or other metal objects.
(b) Use screwdrivers with insulated handles.
(c) Wear rubber gloves and boots.
(d) Do not lay tools or metal parts on top of batteries.
(e) Remove the connection from ground if any part of
the battery is determined to be grounded.
Dispose of or collect (recycle) the battery according to
your own rules set for that purpose or as instructed by
laws and regulations.
Do not dispose of it in fire. Otherwise, it could explode.
Precautions for Safe Use
Before using
Charge the battery soon after purchasing the unit.
• If not used for a long time after being purchased, the UPS may
become unusable because the characteristics of its battery
become inferior.
• Connect the UPS to the input power supply and turn ON the
"Power" switch to charge the battery.
If the UPS is moved from a warm place to a cold place, start using it
after leaving it as-is for a few hours.
• If the UPS is suddenly moved to a warm place, water may adhere
to it (condensation). In such a case, if power is supplied without
checking the condition, the UPS may be damaged.
• Take measures against the unexpected events such as protecting
data and making the system redundant.
• The UPS may stop its power due to failure.
For Connection
Be careful not to let a short-circuit occur between output lines of the
UPS and not to let an output line and the ground be short-circuited (a
ground fault).
• Otherwise, the UPS may be damaged.
To transfer or sell the UPS to a third party, attach all the documents
and other accessories contained in the product package to the UPS.
It is supposed that the UPS is to be used in accordance with the
conditions specified in the attached documents.
While Using the UPS
Turn OFF the "Power" switch of the UPS before turning OFF the input
power supply.
• When the input power supply is stopped, backup operation starts.
• If the frequency of backup operation becomes high, the battery life
may be significantly reduced.
Do not use the UPS for purposes requiring frequent backup operation.
• The battery will deteriorate and become unable to last for the
specified backup time.
S8BA-LF
廢電池請回收
15
Advertisement
Table of Contents
