Before You Start - Snapmaker Enclosure Installation Manual

Guide for Enclosure
Get the Tools Ready
Spanner
for M4 Locknuts
Used Symbols
Notice
Details you should be aware of
throughout the process.
Make sure that the highlighted part is facing the right way.

Before You Start

2.5mm Hex Key Wrench
for M4 Screws
2.0mm Hex Key Wrench
for M3 Screws
Tips
Tips offer you convenient
operations and additional options.
Useful tips for assembling
You don't need to tighten all the screws until the last step, so that you
can adjust every interface to be perfectly matched.
After Assembling
All the Parts
Please tear off the membranes on the plates before you assemble them.
4