Snapmaker Enclosure Installation Manual page 11

Guide for Enclosure
Assemble the Enclosure
1:1
M4 x 32 Screw x 2
1:1
M4x15x1 Nylon
Spacer
x 2
1:1
M4 Locknut
x 2
Protective Ring
x 1
Back
Back Plate x 1
Attach the filament holder and the protective ring
5
to the Back Plate as illustrated.
Tips
You need to detach the filament holder
from the Z Axis of your 3D printer
before this step.
Use the spanner to immobilize the M4
Locknut while tightening the screw.
11