Clutch Adjustment; Rear Brake Light Switch Adjustment - Royal Enfield Continental GT Owner's Manual

Minor Maintenance Tips
ADJUSTMENTS - CLUTCH
B
2 to 3 mm
Clutch Lever (free play 2 - 3 mm)
Loosen the cable outer lock nut (A).
Turn the Nut (B) Clockwise to reduce the play
or Anticlockwise to increase the free play.
Check free play 2 to 3 mm at Clutch lever pivot
on handle bar end.
Tighten lock nut (A) after adjustment is done.

REAR BRAKE LIGHT SWITCH ADJUSTMENT

A
If above are alright, then do the adjustment as
mentioned below:
1. Turn the brake light switch adjustment nut while
holding the rear brake light switch body in
position.
2. If the brake light do not glows after pressing
the pedal for approximately 25mm,turn the
adjusting nut in clockwise direction by 2 to 3
threads and check for brake light function.
3. If the brake light continuously glows,turn the
adjusting nut in anti clockwise direction by 2
to 3 threads so as to get the positions in which
the light goes off.
55
The brake light glows once
you press the brake pedal.
If brake light is not glowing,
check the brake light switch
wire for proper connection
and the brake light Switch
sring for any bend, breakage
or disconnection.