Minor Maintenance Tips
Max
Min
NOTE :
-
Replace oil filter paper element whenever oil is
being replaced.
-
Do not reuse "O" ring and Copper Washers.
CAUTION :
DO NOT fill oil over "Max" mark. It will result in smoke
and loss of power. DO NOT use the motorcycle with
engine oil at "MIN" mark. It will cause oil starvation to
the moving parts in the engine and may also result in
an engine lock up.
Fill recommended
SPARK PLUG
oil to engine till
t he oil level is
upto "MAX" level
mark in the oil
window in Crank-
case Cover right.
Cleaning and adj us ting gap (Refer Periodical
Maintenance Chart for frequency)
Remove HT Lead and the spark plug from the
cylinder head using the plug spanner and
Tommy bar.
Clean the insulator tip and electrodes of the
plug carefully using a pointed scraper or spark
plug cleaner.
Set the gap between 0.8 to 0.9 mm.
Refit the spark plug on the cylinder head and
connect H.T. Lead.
48