Introduction; Manufacturer's Statement - Barbco TRIBOR Series Operation Manual

Manufacturer's Statement

The information contained in this operation manual is necessary for the safe and proper setup,
operation, maintenance, and servicing of your Barbco TriBor machine. Barbco Inc. has a long tradition of
offering the best quality and most efficient to operate underground installation equipment in the world.
Read and understand this manual completely before you use the Barbco TriBor machine and keep it
with the unit at all times for quick reference.
The equipment described in this manual is subject to change. Barbco Inc. reserves the right to change
equipment at any time as part of normal product improvement. Some improvements may have been made
after this manual was printed. For the latest information on your equipment, contact Barbco Inc.
The illustrations contained in this manual are intended to clarify explanations in the text. The
illustrations may look slightly different from your unit, but this has been allowed only if it does not
fundamentally change the factual information. Some optional equipment may be illustrated that your
machine is not equipped with.
The Barbco TriBor machine is capable of boring in various soils for long distance depending upon
local conditions.
How to Reach Us
If you encounter a circumstance that is not covered in this manual, Barbco's service department will
be happy to assist you. Barbco's office hours are 8:00
is located in East Canton, Ohio.
Barbco Corporate Headquarters, East Canton, Ohio
Main Office................................................ (330) 488 - 9400
Toll Free..................................................... (800) 448 - 8934
How to Order Parts
To place an order for spare parts, you can call either of the above numbers. Parts department hours
are Monday through Friday, 8:00
hours a day. Next day service must be called in by 3:00
Spare Parts (fax)........................................ (330) 488 - 2022
When you call the factory for spare parts or service, have the model number and serial number of the
machine. See ID tag located to the right of the operators platform on the Base Push Unit, also on the Power
Pack. Write the serial number of your machine in the space provided below.

Introduction

AM
–5:00
(Eastern Time). Orders can also be accepted via fax, 24
AM PM
Introduction
–5:00 , Monday through Friday. Barbco's office
PM
PM.
1