Engine Operating Instructions And Controls - Barbco TRIBOR Series Operation Manual

ENGINE OPERATING INSTRUCTIONS AND CONTROLS

A factory instruction manual for each specific engine is supplied with the Tribor. Operation and
maintenance information is included in the engine manual. The following instructions cover only the
starting and stopping procedures. All other engine-operating instructions are contained in the factory
manual.
BEFORE STARTING:
1. Check engine oil level. Fill as needed with the oil required for your engine.
2. Check the DEF level. Fill as needed.
3. Check fuel level. Diesel engines use #2 diesel fuel. NEVER LET THE DIESEL FUEL TANK RUN
DRY! If the tank is dry, bleed the fuel system as outlined in the engine manual.
4. Check air cleaner gauge. Service if required.
DANGER! Clear all unauthorized personnel from the machine area and bore pit.
STARTING ENGINE:
1. Turn battery disconnect switches to the ON position. One located on the power pack and one on
the drill unit.
2. Turn the key on the engine panel to the ON position.
3. Verify all system lights are operable.
4. Turn the key switch to START position. After engine starts release the key.
5. Verify all system gauges are working.
26 Operation