Table of Contents
Advertisement
A - ROTATION FUNCTION:
SPEED TOGGLE- high, medium and low spindle speed setting adjusts the
maximum torque per speed range.
R LOCK LIGHT & BUTTON- push the button to lock in the rotation speed. See
auto drill mode.
ROTATION PADDLE- proportional speed control of the rotary spindle.
B - THRUST FUNCTION:
CYLINDER/ R&P TOGGLE- choose between cylinder or rack and pinion thrust.
SPEED TOGGLE- high/ low rack and pinion speed setting adjusts the maximum
force per speed range.
T LOCK LIGHT & BUTTON- push the button to lock in the thrust speed. See auto
drill mode.
THRUST PADDLE- proportional speed control for thrust.
C - DOGS:
IN/ OUT TOGGLE- steel blocks engage into the track to propel the machine forward
or retracted from the track to operate the rack and pinion function.
L&R LED- lights illuminate when the steel block is completely engaged into the
track.
ALIGNED LED- light illuminates when the push bar is aligned with the dog holes in
the track.
D - TRANSMITTER:
POWER TOGGLE- turn power to the transmitter on/ off.
STATUS LED- displays the status of the transmitter.
ACTIVE/ INACTIVE TOGGLE- active allows all functions to work on the transmitter.
E - ENGINE:
START/ STOP TOGGLE- start and stop the engine from the remote.
THROTTLE- When pushed the throttle will adjust in the corresponding direction.
F - E STOP: inactivates the transmitter and puts the machine in a controlled state.
G - DRILLING FLUID:
ON/ OFF- turn the fluid pump on or off from the transmitter. Fluid master must be
on.
DUMP- releases the fluid pressure off the drill string thru the spindle connection.
GPM REHOSTATE- increase or decrease the output gallons from the onboard fluid
pump.
H – DISPLAY
THRUST PSI- digital display of thrust pressure.
ROTATION PSI- digital display of rotation pressure.
FLUID PSI- digital display of the drilling fluid pressure.
SPINDLE RPM- display of spindle rotations per minute.
BACKLIGHT- lights up the digital display
Component Description
17
Advertisement
Table of Contents
