Engine Shutdown - Barbco TRIBOR Series Operation Manual

4. Place the Active toggle to the ACTIVE position to allow all functions. All functions are turned
off when the transmitter is in the INACTIVE state.

ENGINE SHUTDOWN:

1. Turn the transmitter to the INACTIVE state.
2. Turn the transmitter power switch to OFF position.
3. Turn the master switch on the drill unit operator station to the LOCKOUT position.
4. Turn the engine key to OFF position. The engine will shut down.
5. Allow the DEF to purge from the engine. Yellow LED will illuminate during the purge cycle.
6. Turn the battery disconnect on the power pack to the OFF position.
7. Turn the battery disconnect on the drill unit to the off position.
WARNING! Never turn off the engine when the regen operation is on.
28 Operation