Advertisement
Quick Links
Quadratec
QR3 & QR4
®
Tubular Side Step Bars
Installation Manual for '18- Current JL Wrangler Vehicles
#
12004.3044 &
#
12004.3064
" Side Tube Step
4" Oval Side Tube Step
" Round Detail
4" Oval Detail
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUC-
TIONS AND PROCEDURE NOTI ES BEFORE ATTEMPTING TO
INSTALL OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS
AND WARNINGS WITH PRODUCT & VEHICLE OWNERS MANUAL.
THIS PRODUCT IS INTENDED TO REDUCE RISK OF OFF-ROAD
BODY PANEL DAMAGE AND ASSIST IN ENTRY/EXIT FROM
VEHICLE. YOUR TUBE STEP IS NOT INTENDED TO INCREASE
OCCUPANT PROTECTION OR REDUCE VEHICLE DAMAGE IN
EVENT OF ACCIDENT.
PROPERLY TORQUE AND RECHECK FASTENERS AND SECURITY
OF STEP TREAD AFTER 250 MILES AND FREQUENTLY THERE-
AFTER. INSPECT AND DO NOT USE TUBE STEP IF DAMAGED.
DO NOT USE TUBE STEP AS WINCH/SELF-RECOVERY
ATTACHMENT POINT.
CHECK STATE AND LOCAL HIGHWAY SAFETY LAWS REGARDING
PERMITTED ON-ROAD EQUIPMENT.
The Trusted Source
Advertisement
Related Manuals for Quadratec QR3
Summary of Contents for Quadratec QR3
- Page 1 Quadratec QR3 & QR4 ® Tubular Side Step Bars Installation Manual for ’18- Current JL Wrangler Vehicles 12004.3044 & 12004.3064 ” Side Tube Step 4” Oval Side Tube Step ” Round Detail 4” Oval Detail TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:...
- Page 2 Careful attention is required to this instruction or operation but does ® generally not relate to personal injury. Damage to your Quadratec product or other property may result if you don’t follow instructions. Due to the length and bulk of these...
- Page 3 Installation Hardware: PARTS LIST: Nylon Lock Nuts: Driver (Left) Side Step QTY 1 (E) 10mm nylock nut QTY 4 Passenger (Right) Side Step QTY 1 (F) 6mm nylock nut QTY 8 Mounting Brackets: (stamped, see above) Flat Washers: DF) Driver (Left) Front: QTY 1 (G) 10mm flat washer QTY 8...
- Page 4 Installation: QR3 or QR4 Mounting (passenger side illustrated) FIG 1 FIG 2 Put on safety glasses. Starting at the Align the hole in the step mounting front of vehicle locate the vertical bracket (PF) and loosely install using threaded hole behind the pinch weld.
- Page 5 Installation: QR3 or QR4 Mounting (passenger side illustrated) FIG 6 At the rear of vehicle locate the vertical Align the hole in the step mounting threaded hole behind the pinch weld. bracket (PC) and loosely install using (FIG 5) a 8 x 35mm bolt (B), lock washer (J) and flat washer (H).
- Page 6 Installation: QR3 or QR4 Mounting (passenger side illustrated) FIG 9 FIG 1 Now align the step with mounting Loosely install the 8mm bolt with bracket holes as shown. (FIG 9) captive washer (D) using a 13mm socket. (FIG 10) FIG 11...
- Page 7 Product Care and Maintenance: ” Side Tube Step 4” Oval Side Tube Step Your Tube Steps have been designed Because the steps are located on the un- and manufactured to provide years of derside of the vehicle, they are subject use.
- Page 8 Quadratec to obtain a RGA number only to Quadratec branded accessories first sold (610-701-3336). All labor, removal, shipping in the United States, Quadratec warrants to the and installation costs are customer’s initial retail purchaser only that your responsibility.