Winterizing The Water System; Distribution Manifold; Water Pump And Filter - Sea Ray 320 Sundancer Owner's Manual

S
ECTION
B. W
INTERIZING THE
For winterizing the water system refer to Section 8,
Winterization Checklist For Boats Stored on Land,
E. Water System.
C. D M
ISTRIBUTION ANIFOLD
The distribution manifold, located in the engine
room, directs fresh water to the various equipment
throughout the boat.
In the event of a water leak at one of the system
components, ie. sink faucet, shower valve or spigot,
the valve for that component can be closed. The
rest of the system is left operational.
Example:
1. If the head sink cold water line develops a leak.
2. Close the Cold Head Sink valve on the
manifold.
3. The rest of the water system remains
operational while repairs are made to the head
sink cold water line.
4. After repairs are made, turn on the Cold Head
Sink valve.
320 Sundancer (355 Sundancer
®
7 • O
PTIONS
W S
ATER YSTEM
)
®
& A
CCESSORIES
D. W P
ATER UMP AND
The water pump and filter are located adjacent to
the water tank under the forward stateroom bunk.
The filter prevents particles from entering the pump
head. The filter should be checked and cleaned
once a season or when flow is restricted.
Before servicing the system, turn the FRESH
WATER PUMP breaker OFF and open a faucet to
release pressure on the system. To clean the filter,
remove the screen and rinse with clean water.
Replace, making sure the O-ring is in place when
replacing the cover.
W P F
ATER UMP AND ILTER
(F .7.5.1)
IG
WATER PUMP
DISCHARGE
WATER PUMP
W P F
ATER UMP ILTER
(F .7.5.2)
IG
BOWL
F
ILTER
WATER PUMP
FILTER
WATER PUMP
SUCTION
FILTER SCREEN
O-RING
COVER
7.5