Display Camera And Jcu Ii Ip Address; Button Summary - FLIR M500 Operator's Manual

JCU II Buttons

Display Camera and JCU II IP Address

Press the Color button while pushing the joystick forward; the IP address of the JCU II and then
the camera will display on the JCU II screen.

Button Summary

Table 3.1 summarizes the action of each button on the JCU II.
Summary of Button Actions
TABLE 3.1
Button
Color Short
Power Short
Power Long
Home Short
Home Long
Menu Short
Scene Short
User 1
User 2
User 3
Color + Joystick Forward
Right Joystick Button
Left Joystick Button
432-0012-01-10 Version 110
Action
Cycle through the thermal palettes of the IR thermal imaging sensor.
Change JCU II back light illumination level
Display JCU II Power Menu
Return to home position
Set home to current position
Display or exit menus
Cycle through four preset scene settings
Auto Focus (can be reprogrammed)
Horizontal and Vertical Stabilization on/off (can be reprogrammed)
Spotlight on/off (can be reprogrammed)
Display JCU II and camera system IP address
When in OSD, select a menu or menu choice
Enable video tracking, then again to select a target
When in OSD, back to the last menu or exit OSD menu
Stop tracking a target or disable video tracking
August 2020 19