Instalert Highlight, Icealert Highlight; Ir Cooler; User Interface Menu; Interface Language - FLIR M500 Operator's Manual

Settings Menu
InstAlert highlight, IceAlert highlight (0 – 100)
The highlight settings control the range of temperatures to show colored. The hottest range of
temperatures will be shown in red when in InstAlert mode (InstAlert highlight) and the coldest
range of temperatures will be shown in blue when in IceAlert mode (IceAlert highlight). All other
temperatures are shown in grayscale.
To change a numeric setting, using IceAlert for example:
1. Select IceAlert highlight with the right joystick
button.
2. Twist or move the joystick left or right to change
the value.
3. Set the value by clicking the right joystick button.
Navigating away from the menu item before
setting the value will reset it to the previous setting.
IR cooler: (On/Off)
The IR cooler requires approximately six minutes to cool the thermal sensor before IR video is
usable. If the IR video is not required as an instant on feature and if the IR camera is not going to
be used for an extended period of time (4 - 6 hours), the cooler should be turned off to lower power
usage and extend the cooler lifetime.

User Interface Menu

Interface Language: (English/
display icons, and help text.
Display icons: Minimal, Custom, Full
Selecting Minimal turns off most of the on-screen icons except when their corresponding controls
are actively in use. The pan position (azimuth) icon, tilt (elevation) position icon, and the FLIR logo
are always displayed. Other icons such as home and scene display on the screen only
momentarily when they are changed. Selecting Full maximizes the display of the on-screen icons.
Some icons such as home are only displayed momentarily. Refer to M500 Installation Guide for
configuring which icons are selected in each setting.
432-0012-01-10 Version 110
/ ) Set the language used in the OSD menu,
Españ o l Türkҫe
August 2020 28