For Simple Stack Users - Christie LX41 User Manual

Installation

For Simple Stack users

1.
Press the MENU button on the remote control to
2.
Use the ▲/▼/◄/► buttons to open the
TEMPLATE dialog, then select STACK on
the dialog. (Operating Guide
menu)
3.
Press the MENU button on the control panel of
Set B to display
4.
Use the ▲/▼/◄/► buttons to select
PERFECT FIT from EASY MENU, or the
SETUP menu of ADVANCED MENU.
(Operating Guide
UP menu)
PERFECT FIT dialog
5.
Using PERFECT FIT on Set B, adjust the im-
age size and position of Set B to superimpose
well to the image of Set A. It is recommended
to adjust in the following ways.
(1) Roughly adjust the four
order below.
Top left → Top right → Bottom right → Bottom left
(2) Fine adjust the four corners in the same way.
NOTES for all users
of EASY MENU
• When arranging the projectors side by side
adjust the image position of one projector in accordance with the other projector
as explained above.
• It is strongly recommended to use a flat screen. If a curved or skewed screen
is used, it is very difficult to align the two images even if you use the pin/barrel
adjustment of PERFECT FIT.
• Even through fine adjustment of the images from the two projectors, it may
not be possible to superimpose the images well enough depending on the input
signals. In this case, try the following methods.
- Press the AUTO button on the remote control or execute AUTO ADJUST
(Operating Guide
EXECUTE
- Adjust H POSITION and V POSITION
on each of the projectors.
- Check the RESOLUTION setting in the INPUT
same setting if the setting differs between Main and Sub.
→ INPUT menu)
LX41/LW41 User Manual - Instant Stack Guide
the menu.
→ EASY MENU
appears on screen.
corners in the
• For details on PERFECT FIT,
or SETUP menu
→
SCREEN
or SET-
in the Operating Guide.
(Style
menu) on each of the projectors.
→ IMAGE
(Operating Guide
menu, and change to the
16
display the menu on
STACK of TEMPLATE
PERFECT FIT dialog
on STACK of TEMPLATE
refer to PERFECT FIT
2), it is also necessary to
IMAGE
→
(Operating Guide
020-000509-01 Rev.1 (06-2012)
Set A.
menu)